Power factor: 0.3 to 1 capacitive, 0.3 to 1 inductive
Passive power: 0.1W to 120kW
Frequency: 30Hz to 1KHz
Complies with IEC/EN 61010-1 1000V CAT II, 600V CAT III
Maximum common-mode voltage: 600V AC RMS
Mode of display: LCD display maximum reading: 6000
Range selection: fully automatic range selection
Frequency detection: automatic (when harmonic is serious, it is better to use manual settings for testing frequency so as to assure the reading stability)
Over-range display:
Data holding: hold is shown on LCD
Power supply: 3 batteries of 1.5 V, AAA
Power consumption: 250mW
Storage temperature: -20 to 70°C
Operating temperature: 0 to 40°C
Temperature coefficient: 0.05 x (specified accuracy) per °C
Electromagnetic compatibility: in an RF field of 3V/m, accuracy=specified accuracy, otherwise
Measuring power, voltage, current, peak value, pose, frequency, power factor, phase angle, reaction factor and more of single or three phase circuit
Automatic phase sequence testing is possible for 3-phase measurement
True effective value measurement: accurate measurement is possible even within serious distortion in current waveform
Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, results can be obtained rapidly and presidency and up to 20 harmonics and distortion value thereof can be measured
Key Contact:
Ms
Jiang,
Elinor
Sales Manager
Foreign Sales Dpt
Supplier and product information updated May 17, 2012.
Verified Business Registration Details
Registered Company:
深圳市业海科技发展有限公司
Business Registration Number: 440301105381841
Company Registration Address: 深圳市南山区高新区北郎山二路5号新奥林厂房216室 * In some jurisdictions, company names and addresses are registered in Chinese only.
